Mz KellyDesigns

You will need: A tube Scrap Kit - 'Angels' -from Bel Vidotti  HERE Scroll down till you see the list of her scraps. Font - I use Harrington Filters Unlimited 2.0 - Wall Paper-Fine New white canvas 700x700 Copy & paste BVS frame04 angels as a new layer Resize 70% Bicubic-All Layers un-checked. Image-Free Rotate-90 left. Move this frame over to right side of canvas - duplicate-Mirror. Bring the 2 frames together so that the insides just touch each other. Merge Down. Magic Wand - click inside each frame - Selections-Modify-Expand 4 Copy & paste one of the papers from the kit - I used Paper8 - resized it 80% Bicubic-All Layers un-checked.Selections-Invert- hit delete. Select None. Move paper layer below frames. Copy & paste BVS bow08 angels as a new layer - resize 50% Bicubic-All Layers un-checked. Place top of frames-Duplicate-Flip-Duplicate once more-Mirror & place centre of frames See mine for example. Make frames layer active-

Only one screen shot in this tutorial as it is an easy tut to do by following my basic instructions You will need: A tube Font My Supplies - HERE Open a new canvas-600x600-white Open supplies in you PSP Paste my Slatt as a new layer - Magic Wand, click inside 1st Slatt-Selection-Modify-Expand by 1, paste paper Invert - click delete - select none. Move this paper layer down under slatt layer. Do the same with the other 2 slatts, remembering to move paper layers down. Drop Shadow - 1/1/60/10-black -paper layers - do the same on the slatt layer. Cross out background layer & merge visable other layers - duplicate - Mirror. Merge down. Paste Flowers onto paper slatts - see mine for example. Paste Hearts onto Flower slatts - paste bow onto Flower slatts. Paste your tube - give same drop shadow as before. Add your name & copyright - crop away most of the white background. Merge All (Flatten) - resize - save as a *Jpeg. This tutorial was written by ©K

You will need: A tube Font supplied HERE WSL_Mask81 by Chelle HERE Scroll down Click on Navigate-Downloads - you will see a list of Chelles Masks - you need Masks 61-120 Scrap Kit - Imagination - FantasyMoments HERE New white canvas 700x700 Copy & paste FM-Imagination-Element-22 as a new layer Resize 65% SmartSize-All Layers un-checked.Duplicate-Mirror, Flip - line up the ends of the ribbons like so Merge Down - Magic Wand-click inside of the merged ribbons-Selections, Modifify-Expand 4. Copy & paste one of the papers from Scrap Kit - Invert-delete - Select None Move paper layer below ribbon frame. Give ribbon frame this drop shadow Copy & paste FM-Imagination-Element-11. Resize 45% SmartSize-All Layers un-checked Place the flower bottom left corner of ribbon frame - duplicate-resize 80% SmartSize-All Layers un-checked Move that flower along a little bit - duplicate once more, moving along a little bit. Cross out eyes on bottom

You will need: A fairy tube of choice My Frame from supplies HERE Font of choice Scrap Kit- Green Nature -from FantasyMoments HERE New white canvas 600x600 Copy & paste my Frame as a new layer. Copy & paste FM-GN-Element-14 as a new layer Move the flower below the frame - Adjust-Blur-GaussianBlur 35. Effects-Plugins-Pena.com-Dot and Cross Default settings. Make top layer active - copy & paste FM-GN-Element-7 as a new layer Resize 50% Bicubic-All Layers un-checked - place the flowers on the left bottom of the frame - Duplicate-Mirror - Merge Down. Give the flowers this Drop Shadow Copy & paste FM-GN-Element-58 as a nerw layer - resize 50% as before-give same drop shadow Place it at the bottom of the frame between the flowers (see mine for example) Copy & paste FM-GN-Element-55 as a new layer- resize 50% as before, placing in the middle-top of frame. Drop shadow as before Copy & paste FM-GN-Element-9 as a new layer - resize 40% B

You will need: A tube Font My supplies - HERE Animation Shop New canvas - 600x600-white Copy my diamond shape & paste it as a new raster layer Click inside of diamond-Selections-Modify-Expand 2 New Raster Layer - flood fill with a colour from your tube Drag this layer below your diamnd shape.Keep selected Effects-Texture Effects-Blinds with these settings Keep selected - Paste your tube as a new layer & place centre of diamond - see my image.Invert selection - Eraser Tool - erase the bits of tube sticking out of diamond. Back to diamond shap-selection-Float-Defloat-Modify-Select Selection Borders with these settings New Raster Layer-flood fill with a colour from your tube De-select Drop Shadow new diamond shape - 1/1/80/8.50-black Give your tube the same drop shadow Add your name & copyright. ANIMATION Cross out all layers except your filled blind diamond layer - copy merged, paste in AS as a new animation Effects-Insert Image Effec

Image/tube of choice Font of choice Animation Shop Xenofex 2 My supplies - HERE New canvas-600x600-white Preset Shapes- Star2 - width 10 White as your foreground colour-null background Draw out a large star shape-convert to Raster Layer. With your magic wand, click inside of star- go to Selections- modify-Expand by 2. New Raster Layer- Flood Fill with a colour from your tube/image. Keep selected - copy & Paste your tube/image, position it inside the star. Invert-Eraser Tool, erase any of the tube/image outside the star.Select non- drop shadow the tube - 1/1/75/8.50-black. Do the same with the star shape. Duplicate your combined star & fill-resize 45%, place at side of main star. Duplicate a few more times to get a gathering of small stars as shown with mine. When you have the small stars placed - cross out all other layers, leaving small stars active - merge-merge visable. Duplicate your small stars 3 more times - cross out top 3 stars making ori

A tube/image of choice Font of choice Weescotlass mask 81 - HERE WordArtMix6* from Weestcotlass - HERE New canvas - 600x400 - white Select 2 colours from your image/tubes, make a gradient, Linear, Angle 45, Repeats 0. New Raster Layer on your canvas - flood fill it with your gradient. Mask layer - load WS Mask 81 - invert mask unticked When you have your mask loaded - merge group. Add a new Layer, using your selection tool set to rectangle, make a selection on the right side of your masked image. Floodfill this selection with your gradient. Effects - Plugins - penta.com - color dot with these settings - While still selected - drop shadow - 1/1/80/8.50-black. De-select Copy & Paste your tube/image & place over the coloured rectangle. Drop shadow as before. Preset Shapes - heart - draw out a heart shape to the right of your new images - Width - 2, see mine above.Duplicate heart shape 2 times to give a total of 3 heart images.Cross out bottom

Image of choice. Font of choice Mask 170-from Weescotlass - HERE New canvas-600x600-white Choose two colors from your graphic Make a gradient with these settings, Linear, Angle 45, Repeats 0. New Raster Layer - Flood Fill with your gradient Mask layer - load WS Mask 170 - invert mask unticked When you have your mask loaded - merge group Resize your igraphic to about 225 x 300, add a 3 white pixel border. Magic Wand, click the white border - fill with your gradient. Select none Copy & Paste your igraphic onto your white canvas - go to your canvas Image - Free Roatate - 15 left. Now duplicate your graphic 2 times for a total of three images. Arrange these graphics like above. When you have your images in place - cross out bottom layer & your mask layer, merge visable your images. Unhide you 2 bottom layer. Give your merged images a drop shadow of - 1/1/80/8.50-black Copy & Paste your original grapic as a new layer - give it the same drop sh

Supplies HERE You will need a tube or image of your own. I have used an image from ©Henri Peter for my tag New canvas - 600x400-white Open up all supplies including the image you will be using. Choose a colour from you image for your foreground colour, background nulled, then go to preset shapes rectangle-line style-Dot-width 5 Draw out a rectangle & place it to the left of your canvas. When happy with position convert to raster layer. Drop shadow-3/3/30/3/black Select your Freehand selection tool & draw around your rectangle, new raster layer, fill the seletion with a gradient of your choice. When you have done this, move that layer below the rectangle. Copy & Paste you image - resize if needed - placing image to the left of your rectangle.Drop shadow as before. Choose a colour from your image - foreground- background nulled new raster layer, using the perriwinkle brush, resized to 325, place your brush on the right side of the rectangle.

You will need: A tube - preferably sitting Font of choice A Flower Brush of choice New canvas 600x500 white New raster layer Go to View- Rulers and select. Choose your selection tool circle Go in the middle 300x300 and draw a circle till 100 (when you look at measures and you pull, you’ll see a black line) flood fill with a colour from your tube Hold the selection Selection-modify-contract 30 New Raster layer, flood fill with another colour from your tube, keeping the selection. Go to MuRa's Meister-Cloud with these settings (Select colours from your tube) Keep selected - go to Effects-Illumination Effects-Sunburst with these settings New Raster layer - Selection modify-Select selection borders with these settings Flood fill your selection with White Drop shadow - 4/4/75/4-white Repeat -4/-4 Layer opacity- dissolve Drop shadow 1/1/100/black.Select none. Cross out bottom layer - Merge visible layers Preset Shapes-Square-Line Style-Barbed Wir